Mono AGM720 Long Haul Pumps Coupled to Yanmar Diesel Engine TF70 7hp – TF90 9hp – TF120 12hp – TS190 19hp Electric Starting

Mono AGM720 Long Haul Pumps Coupled to Yanmar Diesel Engine TF70 7hp – TF90 9hp – TF120 12hp – TS190 19hp Electric Starting

$16,295.00$18,660.00

In stock

$16,295.00$18,660.00

Reviews Summary by AI:

Mono Agricultural Surface Pump (AGM720) is a water transfer pump from rivers, dams or tanks to a desired location.
Mono electric unit consist of a pump and step down pulley to electric motor built on fabricated galvanised steel base

7.0 HP : Pump performance:   2.8 lps @ 100 metres   (2200 gph)
9.0 HP : Pump performance:   4.0 lps @ 100 metres   (3150 gph)
12HP : Pump performance:   5.5 lps @ 100 metres   (4200 gph)
19HP : Pump performance:   6.5 lps @ 100 metres   (5200 gph)

SPECIFICATIONS

Suction and discharge –  50mm (2″) Female BSP Internal Thread

Manufacturer’s warranty:  2 years   Made in Australia

SKU: N/A
Clear

Description

Mono Agricultural Surface Pump (AGM720) is a water transfer pump and has been designed to pump water from rivers, dams or tanks to a desired location.
Mono AGM Surface pumping system is designed and manufactured in Australia.
Mono Pumps AGM has been design tested and proven in the field over a wide range of water pumping applications.

7.0 HP : Pump performance:   2.8 lps @ 100 metres   (2200 gph)     Yanmar  TF70 – 7.0hp  (pump speed 600 rpm)
9.0 HP : Pump performance:   4.0 lps @ 100 metres   (3150 gph)    Yanmar TF90 – 9.0hp (pump speed 800 rpm)

12HP : Pump performance:   5.5 lps @ 100 metres   (4200 gph)      Yanmar TF120 – 12.0hp (pump speed 1000 rpm)
19HP : Pump performance:   6.5 lps @ 100 metres   (5200 gph)     Yanmar TS190 – 12.0hp (pump speed 1200 rpm)

SPECIFICATIONS
Operating Temperature: -10 to 40 deg C
pH range 6 to 8.5
Hardness Range 2000 mg/L
Salt Concentration 500 ppm

Rotor Selection – Water Temperature
Standard rotor : 10 to 40 deg C
Mark 3 rotor : 40 to 70 deg C

Mechanical Specification
Suction –  40mm (1 1/2″) Female BSP Internal Thread
Outlet –  40mm (1 1/2″) Female BSP Internal Thread

Direction of Rotation
Anticlockwise when viewed from the motor or bearing housing end.

Materials (Excluding Motor)
Pump Barrel: 304 Stainless Steel
Stator: Natural rubber lining
Rotor: 316 stainless steel
Hard Chrome Plated
Flexishaft: Titanium
Mechanical seal: Carbon/Ceramic/Nitrile:
Mechanical seal holder: 304 Stainless Steel
Discharge Chamber: Cast Iron

Maximum Design Pump Pressure
AGM720 – 1200 kPa

Note: Pumps are capable of much higher pressure if flow of pump is reduced.
Running at over design pressure will reduce the life of the pump.

Manufacturer’s warranty:  2 years   Made in Australia

 

 

Additional information

Weight40 kg
Dimensions150 × 40 × 40 cm
Size

AGM720 + TF120 Yanmar electric start on steel fabricated base, AGM720 + TF70 Yanmar electric start on steel fabricated base, AGM720 + TF90 Yanmar electric start on steel fabricated base, AGM720 + TS190 Yanmar electric start on steel fabricated base

AGM line drawing

Download