Description

Mono Agricultural Surface Pump (AGM720) is a water transfer pump and has been designed to pump water from rivers, dams or tanks to a desired location
Mono AGM Surface pumping system is designed and manufactured in Australia
Mono Pumps AGM has been design tested and proven in the field over a wide range of water pumping applications

7.0 HP : Pump performance:   2.8 lps @ 100 meters   (2200 gph)     Yanmar  TF70 – 7.0hp  (pump speed 600 rpm)
9.0 HP : Pump performance:   4.0 lps @ 100 meters   (3150 gph)    Yanmar TF90 – 9.0hp (pump speed 800 rpm)
12HP : Pump performance:   5.5 lps @ 100 meters   (4200 gph)      Yanmar TF120 – 12.0hp (pump speed 1000 rpm)
19HP : Pump performance:   6.5 lps @ 100 meters   (5200 gph)     Yanmar TS190 – 12.0hp (pump speed 1200 rpm)

SPECIFICATIONS
Operating Temperature: -10 to 40 deg C
pH range 6 to 8.5
Hardness Range 2000 mg/L
Salt Concentration 500 ppm

Rotor Selection – Water Temperature
Standard rotor : 10 to 40 deg C
Mark 3 rotor : 40 to 70 deg C

Mechanical Specification
Suction –  40mm (1 1/2″) FBSP Internal Thread
Outlet –  40mm (1 1/2″) FBSP Internal Thread

Direction of Rotation
Anticlockwise when viewed from the motor or bearing housing end.

Materials (Excluding Motor)
Pump Barrel: 304 Stainless Steel
Stator: Natural rubber lining
Rotor: 316 stainless steel
Hard Chrome Plated
Flexishaft: Titanium
Mechanical seal: Carbon/Ceramic/Nitrile:
Mechanical seal holder: 304 Stainless Steel
Discharge Chamber: Cast Iron

Maximum Design Pump Pressure
AGM720 – 1200 kPa

Note: Pumps are capable of much higher pressure if flow of pump is reduced.
Running at over design pressure will reduce the life of the pump.

Please call us on 07 3208 9499 to check availability

Manufacturer’s warranty:  2 years   Made in Australia

Additional information