600 Litre SPS Sewage Pump Station Single Grinder Pump – Level Alarm Panel – Float Switch – Three Phase – SPS600T3
$3,980.00
One Automatic three phase Grinder Pump Sewage Pump Station
Pump performance: 50 lpm @ 14 metres
Power supply: 400 volt three phase FLC 2.8 amps
Tank storage: 450 and 600 litre indication on tank
Controls: Automatic pump with level panel with audible and visual alarm
Manufacturer’s warranty: 2 year Made in Australia
- Description
- Additional information
- Downloads
Description
Sewage Pump Station with 600 litre polythene tank, one automatic three phase grinder pump with high level alarm.
High level alarm has audible and visual indication
Pump performance: 50 lpm @ 17 metres
Pump performance: 80 lpm @ 15 metres
Pump performance: 100 lpm @ 13 metres
Grinder Pump specification:
400 V three phase with automatic float
Lead on pump: 10 metre rubber lead
Pump protection: circuit breaker in enclosure
Power supply: three phase 400/3/50
Supplied with pipework, valving and chain to lift pump from well. Existing with PVC 40mm
Level alarm: Level panel with audible and visual alarm
Storage tank: 600 litre polythene tank is a housing for black and grey water pumps
600 litre capacity (minimum requirement for NSW)
Approved to requirements of Australian Standard AS/NZS1546.1
Controls: Three phase controls indication high level.
Low voltage float switch will close when liquid rises setting off an audible and visual alarm.
Controller has a mute button and once fault is fixed the controller will reset.
IP54 rated will require protection against weather conditions.
Float switch supplied with 10 metre lead
Manufacturer’s warranty: 2 years Assembled in Australia
Additional information
Weight | 140 kg |
---|---|
Dimensions | 130 × 130 × 130 cm |