Liquid Level Alarm Panel with SMS Single Phase 240v Model FPC-12651-SMS – Low and High Level

Liquid Level Alarm Panel with SMS Single Phase 240v Model FPC-12651-SMS – Low and High Level


In stock


View cart

MATelec Australia’s Liquid Level Alarm with SMS features our newly designed ME-Link module, which is a cellular CAT-M1 remote monitoring and control device utilising the 700Mhz frequency for ‘best in class’ signal strength. The ME-Link reports status information and active alarms from the Liquid Level Alarm. The ME-Link Module can also be used to control external devices with the two onboard relay outputs. Easy to set up SMS commands are used to configure the operation and alarms without the need for any additional software.

SKU: FPC-12651-SMS


Level alarm – Provides warning indication and alarm when a water storage tank is empty or full
Auto-silencing alarm – If not muted, the buzzer will silence after 5 minutes, then sound briefly every 5 minutes (this feature can be disabled if a continuous alarm is required)

Product Features

ENCLOSURE: IP54 rated, powder coated mild steel enclosure with removable gland plate

PROTECTION: Low voltage control and input circuitry

Din rail mounted terminal connections

CONTROL & INTERFACE: Visual ( strobe) and audible ( buzzer) alarm

Level alarm keypad interface : Indicator lights for power on, level alarm

ME-Link loT/SMS module (requires micro SIM card from CAT-M1 enabled network provider – only Telstra currently

Vandal resistant antenna

Battery for backup on mains power failure

INPUTS: Single phase (230Vac) power supply

Digital 12Vdc input for float switch

5x additional 12 Vdc inputs on ME-Link module

OUTPUTS: 2x Relay outputs on ME-Link module

INCLUDED with PANEL: 10 Amp 3 pin 1.5 power supply lead

Float switch not included, recommended float switch MODEL 9006

Manufacturer’s warranty:  12 months





Additional information

Weight3 kg
Dimensions24 × 24 × 15 cm


FPC-12651-SMS specification sheet


FPC-12651-SMS operation manual