45kW 60HP Touch Screen Single VFD Pump Control Panel – Constant Pressure Controlled Starter
$11,460.00
Single 45kW or 60HP Pump control panel for the control of constant pressure.
Various applications including water transfer, wash down, irrigation or water treatment/filtration
Can be used on multistage pumps, end suction, submersible turbines and bore pumps
Contact us if using cables over 5 metres long between drive and motor
Powder Coated Metal Enclosure, Wall Mount, IP56 with Inner Door and Fan Vent Hoods
Control Panel supplied with 16bar pressure transmitter
Manufacturer’s warranty: 12 months
- Description
- Additional information
- Downloads
Description
STANDARD FEATURES:
* Main Isolator Switch
* 45kW Variable Speed Drive for pump – constant pressure operation
* Integral fan ventilation and thermostatically controlled enclosure temperature
* Circuit Breaker for Individual Pump Isolation
* Low Voltage Control and input Circuitry
* Hydrotouch Colour 7 inch touch screen operator interface
* Hydrotouch integral setup wizard
* Auto/Off/Manual Operation of Pump
* Alarm display screen with visual and audible alarm and mute button
* Logged data for start & fault counters
* Pump run hours and start counters
* Current pressure display
* 2 x 4-20mA Analogue and 3 x 12Vdc digital inputs for constant pressure
* 1 x Pulse input for flow meter
* 5 x BMS volt free outputs
* 2metres of shielded VSD cable for motor connection
* Pressure transducer, 0-16 bar range, loose supply for installation in discharge pipework
* Single Pump Connection
CUSTOMISED FEATURES:
* Powder Coated Metal Enclosure, Wall Mount, IP56 with Inner Door and Fan Vent Hoods
Manufacturer’s warranty: 12 months
Additional information
| Weight | 60 kg |
|---|---|
| Dimensions | 100 × 60 × 40 cm |
