Bianco BIA-INOX45S2MPCX Water Pressure Pump Replaced by BIA-INOX45S2NXT

Bianco BIA-INOX45S2MPCX Water Pressure Pump Replaced by BIA-INOX45S2NXT


In stock


Reviews Summary by AI:

Motor / power: 450W 240volt single phase
Max. flow: 50 litres per minute
Taps: 4 taps (calculated at 8 lt/min each tap)
Maximum Pressure: 380 kPA
Suction hose diameter: 1″ / 25mm
This pump is now supplied as BIA-INOX45S2NXT , slightly different controller however dimension and performance the same
Manufacturer’s warranty:  2 years

AS/NZS 4020 Drinking Water Approved.



The pump is a self-priming surface mounted pressure system pump supplied with plug and play leads (IEC type). The self-priming ability provides excellent suction capacity of up to 9m.
Used especially for supplying water to domestic installations.

The pump is characterised by:

• Automatic electronic pump control fitted and wired with plug and play leads so a licensed electrician is not required during installation.
• Includes fully electronic pump controller for automatic pump starting, stopping and restart after power loss and water loss.
• Run dry protection to prevent pump damage
• Automatic electronic control has in-built check valve to prevent water backflow through the pump.
• 2.2bar pump cut in for greater versatility.
• Corrosion resistant pump body, diffuser and impeller to ensure pump durability
• High quality mechanical shaft seal and high quality bearings
• 240V single phase TEFC motor with in-built auto reset thermal overload to prevent the pump from overheating.


Used especially for supplying water to domestic installations and applications where a suction lift is required.

Package Information

• 11 kg
• L 420mm x W 230mm x H 460mm

This pump and controller is no longer supplied, new model same performance, same dimensions is BIA-INOX45S2NXT


Additional information

Weight11 kg
Dimensions42 × 23 × 46 cm

Bianco Pumpz



Jet Pump Operation & Installation manual