Dual Sewage Pump Control Panel – Model FPC-30040 Supply 400/3/50 Three Phase With Inner Door
$1,160.00 – $1,260.00
Matelec Dual pump control panel with controls on inner door
Three phase DOL starting up to 7.5kW dual pumps
Mains isolation, individual CB and indication lights
Audible and visual alarm, float switches for level control
Out door installation, must be installed by Electrician
- Description
- Additional information
- Downloads
Description
DOL control panel for two submersible pumps (either sewage, trade waste or storm water)
Control panel can be installed out doors
- Enclosure:
- IP56 weatherproof rating
- Powder coated mild steel
- Inner door and removable gland plate
- Protection:
- Pad lockable mains power isolator switch
- Circuit breaker protected low voltage control and input circuitry
- Individual pump isolation
- Contactor and thermal overload protection of pumps
- Electronic short and overload protection of strobe/buzzer
- Alarms:
- Visual (strobe) and audible (buzzer) alarms
- Control & interface:
- Electronic Keypad
- Indicator lights for power on, level alarm, pump run/fault
- Visual and audible alarm mute/reset/test button
- Auto/off/manual operation of pumps
- Dip switches for input and operation configuration
- Inputs:
- 4 x digital 12Vdc inputs for float/pressure/flow switches
- Standard terminal setup: Low level, pump stop, pump start and high level float switches
- Outputs:
- 2 x pump supply outputs
- 1 x BMS volt free output for common fault
Manufacturer’s warranty: 12 months , call us for more details, servicing or custom builds
Additional information
| Weight | 17 kg |
|---|---|
| Dimensions | 42 × 22 × 49 cm |
| Brand | Matelec |
| Size | 1.6 – 2.5 Amp each pump 400/3/50 supply, 12 – 18 Amp each pump 400/3/50 supply, 2.5 – 4 Amp each pump 400/3/50 supply, 4 – 6 Amp each pump 400/3/50 supply, 5.5 – 8 Amp each pump 400/3/50 supply, 7 – 10 Amp each pump 400/3/50 supply, 9 – 13 Amp each pump 400/3/50 supply |
