Solar submersible pump is fitted with a DC motor which enables the efficient use of solar power
The pump system can be used for tank filling or topping up a dam.

Pump performance: flow rate 200 gph @ 130 feet ( 15 lpm @ 40 metres)
Shut off head  100 metres
Flow rate 8 lpm @ 60 metres
Flow rate 15 lpm @ 44 metres
Flow rate 20 lpm @ 30 metres          Performance during middle of day in full sunlight

Material of pump:  AISI 316 stainless steel

Kit includes the following:

1 x  3HR210-80/1.8A  3″ Solar Helical Rotor Pump
1 x  Sacrificial anode supplied with pump
2 x  415W solar panels
1 x  32mm bore cap to suit maximum 5″ casing
1 x  45 meter length of submersible cable for pump
1 x   Heat shrink
1 x  manifold from bore hole to 32mm FI BSP outlet
2 x  32mm poly metric end connectors for pipework
1 x  Controller for DC power from solar panels to motor
1 x  Float switch with 5 metres of cable to install into water tank
2 x  pair of MC connectors

Features:
3″ outside diameter dimension
Three phase FLC 1.8A DC motor
DC controller has float switch or pressure switch terminals
DC controller LED displays for Amps, RPM, Voltage, Watts
DC controller must be protected from weather IP56 rated
Pump connection:  20mm FI BSP

Manufacturer’s warranty:  2 years