Automatic Pump Controller – Models PC-15 PC-22 & APC-15 – Auto Restart – 25mm MBSP Connections – Single Phase – PRESS CONTROL
$121.00
Auto restarting pump controller
Plug and play with IEC lead and pressure gauge
PC-15 … single phase, max 10.0amps cut in 1.5bar, vertical connections
PC-22 … single phase, max 10.0amps cut in 2.2bar, vertical connections
APC-15 … single phase, max 10amps cut in 1.5bar, horizontal discharge
Connections: 25mm MBSP
Max working pressure 10bar
Min pump pressure 250kPa – Minimum shut off head of pump
Supplied with 10amp Female and 10amp Male 3 pin plug and lead
Manufacturer’s warranty: 12 months
- Description
- Additional information
- Downloads
Description
Controller monitors both the pressure and the flow
Controls the operation of the pump automatically
There is no need for a separate pressure (expansion) tank however your pumpset will operate with a pressure tank
Fixed pressure ratings: ie PC-15 .. start pressure 1.5bar – shut down Pump shut off head
Fixed pressure ratings: ie PC-22 .. start pressure 2.2bar – shut down Pump shut off head
Fixed pressure ratings: ie APC-15 .. start pressure 1.5bar – shut down Pump shut off head
Unit will protect the pump should the water supply fail (due to blockage in the pipe or pump running dry) and will automatically restart normal operation after 24hour shut down
Features and Benefits
Starts and stops the pump automatically when the tap is opened or closed
Maintains a constant pressure/flow from the pump during operation resulting in a reliable water supply
Automatically restarts the pump in the event of power failure
The controller eliminates pressure fluctuations at flows as low as 6L/min
Manufacturer’s warranty: 12 months
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Size | APC-15 press control with 25mm MBSP horizontal discharge, PC-15 Press control 10amps single phase with run dry protection, PC-22 Press control 10amps single phase with run dry protection |
