Description

HydroSTART controller brings the features of the standard single  pump controllers into a new age with a range electronic overload
Australian Made – all electronic PCBs are being manufactured in Australia including the control touchpads
Accuracy of pump motor protection – less nuisance tripling and pump protection where it’s needed
Pump level status showing on touchpad – indicator lights for each level input is standard
FUNCTIONS:
Level control mode – Level empty operation controlled by up to 3 float switches
Automatic pump can also be controlled with alternation and alarm floats
Pressure control mode – Pressure boost operation controlled by up to 2 pressure switches: Duty start/stop and low
pressure
Manual pump control – Manual pump mode with optional 5 minute timeout to revert to auto mode
System enable input – Enables and disables the system in auto mode
Smart chirp mode alarms – Audible alarm automatically silences after 5 minutes if not muted, then chirps every 5 minutes
FAULT PROTECTION:
High level alarm – Alarms after 15 minute delay with auto reset in stormwater mode, or after 1 minute with manual reset only in
sewage mode
Low level protection – Alarms and shuts down pump on low level, manual reset only
Low pressure protection – Alarms and shuts down pump if low pressure input is closed for 60 seconds
Prime loss protection – Alarms and shuts down running pump if there is no flow for 30 seconds
Pump anti-seize protection – Runs pump periodically during low use to prevent seizing
Pump current sensing – Provides adjustable pump overload, undercurrent and zero current protection

Additional information