Description

Davey Prime Jet 240 Single Phase can be used for many applications including water transfer, wash down, pressure unit for tank filling or pressurised water supply. Water can be drawn from bore hole or off set installation from dam or creek.

Pump Performance:   with injector 22468  (min 4″ ID bore casing)
Injector depth 12 meters, Flow rate 96 lpm, Discharge pressure 350 kPa
Injector depth 18 meters, Flow rate 73 lpm, Discharge pressure 350 kPa
Injector depth 24 meters, Flow rate 54 lpm, Discharge pressure 350 kPa
Injector depth 30 meters, Flow rate 37 lpm, Discharge pressure 350 kPa

Pump outlet: 1¼” (32 mm) BSP Female. ‘Automatic Demand Response’ valve fitted
Suction pipe sizes: 2″ and 1¼” I.D Imperial poly pipe for injector kit no. 22468.
All performances are with injector submergence of 3 meters and min pipe length of 12 meters
All pipe fittings and hose clips are included with deep well injectors.
For offset applications, performance will be reduced if suction pipe lengths are longer

Motor details:  2.5kW 240volt single phase IP56 FLC 14 amps LRC 52 amps
Single phasing protection is strongly recommended

Manufacturer’s warranty:  2 years  Made in Australia

Additional information