Description

Slurry Submersible pump used for concrete batching plants, contracting pump, mine and flood dewatering

Pump performance:   20 lps @ 18 metres
Flow rate:  zero flow @ 22 metres  Shut off head
Flow rate:  13 lps @ 20 metres
Flow rate:  30 lps @ 15 metres
Flow rate:  40 lps @  9 metres
Flow rate:  50 lps @  5 metres    End of curve

Electric submersible pump
Protection class IP68
Depth of submersion max. 30m
Impeller Type: Open type impeller with Agitator
Solids Handling: Max. solid handling 30 mm
Liquid:  Suitable for sludge, slurry, liquids containing sandy mud and bentonite
Electric Motor: Dry-type submersible induction motor, Insulation class B 4 poles, 1440 r.p.m.
DOL: Direct on line start
Voltage: 380V – 415V, 50Hz, three phase
P1 Power input: 10.8 kW , P2 Power output: 9.0 kW
Full Load Current:  18.5 amps
Start current: 155.0 Amps
Electric Cable 20 meters  H07RN-F 4C x 4 mm2
Motor Protection: Circle thermal protector (snap-action bi-metal device)
Shaft Seal: Double mechanical seal in oil bath additional lubrication by oil lifting device
Primary Seal: silicon carbide on silicon carbide
Secondary Seal: silicon carbide on silicon carbide
Bearings: Shielded ball bearings, maintenance-free
Materials
Impeller: Chromium iron casting
Agitator: Chromium iron casting
Casing: FC200 (EN-GJL-200)
Suction Plate: Chromium iron casting
Motor frame: FC150 (EN-GJL-150)
Shaft: SUS420J2 (EN-X30Cr13)
Discharge Connection: 150mm hose tail

Manufacturer’s warranty:  12 months  Made in Japan

Additional information