PMCO Metric Poly Coupling or Joiner – Blue Line Fitting Sizes 16 20 25 32 40 50 63 75 90 110

PMCO Metric Poly Coupling or Joiner – Blue Line Fitting Sizes 16 20 25 32 40 50 63 75 90 110


In stock


Reviews Summary by AI:



Fittings are suitable for joining Metric Blueline polyethylene pipes – PE-HD.
Fittings comply with the dimensional requirements and characteristics of the following relevant standards:
– ISO 3458 / 3459 / 3501 / 3503 ISO 14236
Operating Pressure
Fitting Pipe Diameter 16mm up to 63mm: 1600kpa (16 bar)
Fitting Pipe Diameter 75mm up to 110mm: 1250kpa (12.5 bar)
Refer Pumps & Pipes for Derating with liquid temperature above 20-degree C.
Australian Standard Conformity: AS4020 Drinking water approved.
Fittings offer excellence weather properties that protect against degradation UV Radiation (installed in exposed systems)
Threads (BSP) are manufactured according to ISO 7, DIN2999 and BS 21
All internal female threads smaller then 80mm are parallel
All male threads and other female threads are tapered
Recommended that PTFE Tape is used when making threaded connections
Assembly should be carried out by hand and final tightening by Cap Wrench (PMWRENCH)
Extra care must be taken not to over tighten and otherwise damage the thread

Manufacturer’s Warranty: 2 Years 

Additional information


PMCO110110 110mm Poly Coupling Fitting, PMCO1616 16mm Poly Coupling Fitting, PMCO2020 20mm Poly Coupling Fitting, PMCO2525 25mm Poly Coupling Fitting, PMCO3232 32mm Poly Coupling Fitting, PMCO4040 40mm Poly Coupling Fitting, PMCO5050 50mm Poly Coupling Fitting, PMCO6363 63mm Poly Coupling Fitting, PMCO7575 75mm Poly Coupling Fitting, PMCO9090 90mm Poly Coupling Fitting

Poly Compression Fitting Catalogue