Description

The Nastec Solar Inverter is able to convert DC voltage coming from solar panels into AC voltage for powering any pump driven by a three-phase motor.
Pump speed is constantly adapted to available solar irradiation thus maximising the amount of pumped water and making possible operation even in conditions of low sunlight.
The device also offers complete pump protection against surges, overloads and dry running.
Change your existing Three Phase pumping system into a solar powered pump system.
Call us and we can design a solar pump system for your application

System Parameters
MPPT Solar Control mode
Run dry protection
Minimum and maximum frequency for controlling pump
Min and Max pressure requirements
Fault register

Electrical characteristics
Rated Output Current 25 Amps   11kW  400/3/50  (variable amperage and frequency)
Rated ambient temperature: -10 to 50°C (14 to 122°F).
Operating temperature: -10 to 60°C (14 to 140°F).
Max altitude at rated current: 1000 m.
Protection degree: IP66 (NEMA 4X) (Size 2)
Digital outputs configurable as N.O or N.C:
1. Motor run signal 2. Alarm signal
Analog inputs, (10 or 15 VDC):
1. 4-20 mA  2. 4-20 mA 3. 4-20 mA or 0-10 VDC 4. 4-20 mA or 0-10 VDC
4 digital inputs, configurable as
N.O or N.C, for motor start/stop
Bluetooth® SMART (4.0)

Sine wave filters are mainly used in combination with variable speed drives to protect the motor against excessive voltage spikes and overheating.
Must be installed in motor leads longer than 10 meters.
Must be installed when retrofitting an old pump unit with a VFD, contact us
Must be installed in AC VFD’s and Solar DC/AC Inverters

Manufacturer’s warranty:  12 months

Additional information