Description

Bianco iPROTECT is used to control single-phase pumps up to 7.5 KW and is suited for borehole, drainage, transfer and boosting in single pump applications.
The Bianco iPROTECT is suitable for “3-wire” PSC motors where the remote capacitor can be mounted inside the Bianco iPROTECT as well as 2-wire PSC motors with internal capacitor commonly found in surface mounted and submersible drainage single-phase pumps.
The Bia nXt-Protect is a module intended to control and protect a single pump.
The user can select a control logic sequence to match their application and enjoy the benefits of superior control and protection for the pump.
There are 3 primary control logic modes:
‘Drainage’ where control concentrated at the source
‘Boosting’ which references pressure switching for control
‘Transfer’ which is a mix of source and destination control
By digitally monitoring the running current, the response time
of the nXt-Protect is superior to traditional analogue overload
methods.
Functions:
Alarm parameters are programmable and in some instances trip and recovery time settings can be altered.
Over voltage
Under voltage
Dry Run (under current)
Overload (over current)
Pump stall
Open phase
Phase reversal
‘Anti-seize’ function in drainage mode
Last 5 error log
NXT Protect has an audible alarm and a flashing screen to indicate an alarm state
Control Inputs:
Switched input – float, pressure switch, temperature switching
Level probe (capacitance type probes
TECHNICAL DATA
RATED VOLTAGE (V) 3 Ph 400V +10/-6%
MAX AMPERAGE 12 amps
DEGREE OF PROTECTION I.P. 65
WORKING HUMIDITY 20% – 90% RH
POWER CABLE & MATERIALS None – bare controller only
WORKING TEMPERATURE -25degC to 55 deg C
UNIT DIMENSIONS (L X W X H) 275mm x 200mm x 125mm
UNIT WEIGHT (NET) 1.168 kg

Manufacturer’s Warranty: 2 Years 

Additional information