Description

Smart Pumps are not only smart, they’re smooth.
They operate steadily in partial loads, which prevents the water hammer that’s normally associated with full speed pumps.
What’s more, their accurate speedcontrol during operation and their smooth start-up reduce mechanical stress and wear.
Available from 0.37 to 2.2 kW, Smart Pumps are easy to commission, set up and operate using the simple start-up menu.
Parameters and alarms appear on an easy-to-read display designed to provide complete control of system operation.
They’re easy to program too, with just three keypad touches
Each Smart Pump features an IE5 motor for best-in-class efficiency and enhanced hydraulic performance.
The range has an IP55 enclosure rate, and includes BACnet and Modbus capability for seamless building management system integration in all stand-alone configurations.
The drive is suitable for installations from -20°C to 50°C without power derating.
SVE RANGE:
The e-SV pump is a non-self priming vertical multistage pump coupled to a standard motor.
The liquid end, located between the upper cover and the pump casing, is held in place by tie rods.
The pump casing is available with different configurations and connection types.
Motor: 0.5 – 1.5kW 50HZ 240V Single phase
Squirrel cage in short circuit, enclosed construction with external ventilation.
IP55 protection.
Class 155 (F) insulation.
Performances according to EN 60034-1.
Standard voltage:
– Single-phase version: 220-240 V, 50 Hz.
– Three-phase version: 220-240/380-415 V, 50 Hz for power up to 3 kW, 380-415/660-690 V, 50 Hz for power above 3 kW.
Applications: 
Water Supply and pressure boosting
Water Treatment – ultrafiltration systems
Light Industry – washing and cleaning parts
Pharmaceutical, food and beverage industry – Production plant where specific sanitary standards are required.
Features: 
IES2 drive with permanent magnet motor for top efficiency
More compact than the fixed-speed version, meeting the same duty points with precision and consistency
A variety of connections (threaded, round, clam and oval flanges, Victaulic) configured vertically; ports can be on the same side to save space
Designed for fast, easy maintenance with a balanced mechanical seal, an O-ring seat design and a replaceable diffuser wear ring
Reduced impeller axial thrust for longer standard motor bearing life
Certified for drinking water use (WRASand ACS)
Options include high-temperature seals, low NPSH design, high pressure design, and passivated and electropolished versions
Specifications
Delivery: up to 30m³/h
Head: up to 235m
Liquid temperature: up to 120°C
Pressure: PN25
Power range: 0.37-2.2 kW

Manufacturer’s Warranty: 2 Years 

Additional information