Description

Application: 
Pump fed reservoir – it allows for a single level or variable minimum and maximum levels within a reservoir/tank.
Rainwater Harvesting – as a backup water supply control valve, providing mains water in the event of demand exceeding rainfall.
Specifications:
Working Pressure: 55kPA-1200kPa (8-175psi)
Flow Rate: 425L/min (95gal/min) @1200kPa (175 psi)
Temperature Range: 1 – 60 degrees cel (34-140 degrees f)
Available Sizes:
20mm (3/4″) standard – PB 20
25mm (1″) standard – PB 25
32mm (11/4″) standard – PB 32
20mm (3/4″) Long Tail – PB 20LT
25mm (1″) Long Tail – PB 25LT
Features & Benefits:
Adjustable water levels save electricity and increases pump life
Full on, full off – diaphragm activated
No Float switches – no power required (pump requires pressure or flow switch)
Long tail available – removes need for tank fittings on thin-walled tanks
Can be used as a top up rainwater harvesting valve
Fully serviceable
How it works:
The PumpBuddy will be closed when both weights are submerged (maximum water level).
The valve will remain closed until the bottom weight is exposed (minimum water level).
The valve will then open and remain open until the maximum level is reached.
Spares & Accessories:
Service Kit – PKPB contains diaphragm, jet assembly, backing plates, cotton pin, spring & silicone grease –
Contact the shop for pricing regarding spare parts & accessories

Additional information